2KI + SrSO4 🔥→ K2SO3 + I2 + SrO
Last updated:
The reaction of potassium iodide and strontium sulfate yields potassium sulfite, , and strontium oxide (Other reactions are here). This reaction is an oxidation-reduction reaction and is classified as follows:
Table of contents
Reaction data
Chemical equation
- Reaction of potassium iodide and strontium sulfate
General equation
- Reaction of oxidizable species and reducible species
- Oxidizable speciesReducing agent + Reducible speciesOxidizing agent🔥⟶ ProductOxidation product + ProductReduction product
Oxidation state of each atom
- Reaction of potassium iodide and strontium sulfate
Reactants
Chemical formula | Name | Coefficient | Type | Type in general equation |
---|---|---|---|---|
KI | Potassium iodide | 2 | Reducing | Oxidizable |
SrSO4 | Strontium sulfate | 1 | Oxidizing | Reducible |
Products
Chemical formula | Name | Coefficient | Type | Type in general equation |
---|---|---|---|---|
K2SO3 | Potassium sulfite | 1 | Reduced | – |
1 | Oxidized | – | ||
SrO | Strontium oxide | 1 | – | – |
Thermodynamic changes
Changes in standard condition (1)
- Reaction of potassium iodide and strontium sulfate
Standard enthalpy of reaction ΔrH° kJ · mol−1 | Standard Gibbs energy of reaction ΔrG° kJ · mol−1 | Standard entropy of reaction ΔrS° J · K−1 · mol−1 | Standard heat capacity of reaction at constant pressure ΔrCp° J · K−1 · mol−1 | |
---|---|---|---|---|
per 1 mol of Equation | 391.4 | – | – | – |
per 1 mol of | 195.7 | – | – | – |
per 1 mol of | 391.4 | – | – | – |
per 1 mol of | 391.4 | – | – | – |
391.4 | – | – | – | |
per 1 mol of | 391.4 | – | – | – |
Changes in standard condition (2)
- Reaction of potassium iodide and strontium sulfate
Standard enthalpy of reaction ΔrH° kJ · mol−1 | Standard Gibbs energy of reaction ΔrG° kJ · mol−1 | Standard entropy of reaction ΔrS° J · K−1 · mol−1 | Standard heat capacity of reaction at constant pressure ΔrCp° J · K−1 · mol−1 | |
---|---|---|---|---|
per 1 mol of Equation | 388.1 | – | – | – |
per 1 mol of | 194.1 | – | – | – |
per 1 mol of | 388.1 | – | – | – |
per 1 mol of | 388.1 | – | – | – |
388.1 | – | – | – | |
per 1 mol of | 388.1 | – | – | – |
Changes in aqueous solution (1)
- Reaction of potassium iodide and strontium sulfate◆
ΔrG 412.0 kJ/mol K 0.66 × 10−72 pK 72.18
Standard enthalpy of reaction ΔrH° kJ · mol−1 | Standard Gibbs energy of reaction ΔrG° kJ · mol−1 | Standard entropy of reaction ΔrS° J · K−1 · mol−1 | Standard heat capacity of reaction at constant pressure ΔrCp° J · K−1 · mol−1 | |
---|---|---|---|---|
per 1 mol of Equation | 358.7 | 412.0 | −177 | – |
per 1 mol of | 179.3 | 206.0 | −88.5 | – |
per 1 mol of | 358.7 | 412.0 | −177 | – |
per 1 mol of | 358.7 | 412.0 | −177 | – |
358.7 | 412.0 | −177 | – | |
per 1 mol of | 358.7 | 412.0 | −177 | – |
Changes in aqueous solution (2)
- Reaction of potassium iodide and strontium sulfate
Standard enthalpy of reaction ΔrH° kJ · mol−1 | Standard Gibbs energy of reaction ΔrG° kJ · mol−1 | Standard entropy of reaction ΔrS° J · K−1 · mol−1 | Standard heat capacity of reaction at constant pressure ΔrCp° J · K−1 · mol−1 | |
---|---|---|---|---|
per 1 mol of Equation | 355.4 | – | – | – |
per 1 mol of | 177.7 | – | – | – |
per 1 mol of | 355.4 | – | – | – |
per 1 mol of | 355.4 | – | – | – |
355.4 | – | – | – | |
per 1 mol of | 355.4 | – | – | – |
Thermodynamic data of reactants
Chemical formula | Standard enthalpy of formation ΔfH° kJ · mol−1 | Standard Gibbs energy of formation ΔfG° kJ · mol−1 | Standard molar entropy S° J · K−1 · mol−1 | Standard molar heat capacity at constant pressure Cp° J · K−1 · mol−1 |
---|---|---|---|---|
KI (cr) | -327.900[1] | -324.892[1] | 106.32[1] | 52.93[1] |
KI (g) | -125.5[1] | -166.1[1] | 258.3[1] | 37.11[1] |
KI (ai) | -307.57[1] | -334.85[1] | 213.8[1] | -120.5[1] |
SrSO4 (cr) | -1453.1[1] | -1340.9[1] | 117[1] | – |
SrSO4 (cr) precipitated | -1449.8[1] | – | – | – |
SrSO4 (ai) | -1455.07[1] | -1304.00[1] | -12.6[1] | – |
* (cr):Crystalline solid, (g):Gas, (ai):Ionized aqueous solution
Thermodynamic data of products
Chemical formula | Standard enthalpy of formation ΔfH° kJ · mol−1 | Standard Gibbs energy of formation ΔfG° kJ · mol−1 | Standard molar entropy S° J · K−1 · mol−1 | Standard molar heat capacity at constant pressure Cp° J · K−1 · mol−1 |
---|---|---|---|---|
K2SO3 (cr) | -1125.5[1] | – | – | – |
K2SO3 (ai) | -1140.1[1] | -1053.1[1] | 176[1] | – |
(cr) | 0[1] | 0[1] | 116.135[1] | 54.438[1] |
(g) | 62.438[1] | 19.327[1] | 260.69[1] | 36.90[1] |
(ao) | 22.6[1] | 16.40[1] | 137.2[1] | – |
SrO (cr) | -592.0[1] | -561.9[1] | 54.4[1] | 45.02[1] |
SrO (g) | -8[1] | – | – | – |
* (cr):Crystalline solid, (ai):Ionized aqueous solution, (g):Gas, (ao):Un-ionized aqueous solution
References
List of references
- 1Janiel J. Reed (1989)The NBS Tables of Chemical Thermodynamic Properties: Selected Values for Inorganic and C1 and C2 Organic Substances in SI UnitsNational Institute of Standards and Technology (NIST)
- ^ ΔfH°, -327.900 kJ · mol−1
- ^ ΔfG°, -324.892 kJ · mol−1
- ^ S°, 106.32 J · K−1 · mol−1
- ^ Cp°, 52.93 J · K−1 · mol−1
- ^ ΔfH°, -125.5 kJ · mol−1
- ^ ΔfG°, -166.1 kJ · mol−1
- ^ S°, 258.3 J · K−1 · mol−1
- ^ Cp°, 37.11 J · K−1 · mol−1
- ^ ΔfH°, -307.57 kJ · mol−1
- ^ ΔfG°, -334.85 kJ · mol−1
- ^ S°, 213.8 J · K−1 · mol−1
- ^ Cp°, -120.5 J · K−1 · mol−1
- ^ ΔfH°, -1453.1 kJ · mol−1
- ^ ΔfG°, -1340.9 kJ · mol−1
- ^ S°, 117. J · K−1 · mol−1
- ^ ΔfH°, -1449.8 kJ · mol−1
- ^ ΔfH°, -1455.07 kJ · mol−1
- ^ ΔfG°, -1304.00 kJ · mol−1
- ^ S°, -12.6 J · K−1 · mol−1
- ^ ΔfH°, -1125.5 kJ · mol−1
- ^ ΔfH°, -1140.1 kJ · mol−1
- ^ ΔfG°, -1053.1 kJ · mol−1
- ^ S°, 176. J · K−1 · mol−1
- ^ ΔfH°, 0 kJ · mol−1
- ^ ΔfG°, 0 kJ · mol−1
- ^ S°, 116.135 J · K−1 · mol−1
- ^ Cp°, 54.438 J · K−1 · mol−1
- ^ ΔfH°, 62.438 kJ · mol−1
- ^ ΔfG°, 19.327 kJ · mol−1
- ^ S°, 260.69 J · K−1 · mol−1
- ^ Cp°, 36.90 J · K−1 · mol−1
- ^ ΔfH°, 22.6 kJ · mol−1
- ^ ΔfG°, 16.40 kJ · mol−1
- ^ S°, 137.2 J · K−1 · mol−1
- ^ ΔfH°, -592.0 kJ · mol−1
- ^ ΔfG°, -561.9 kJ · mol−1
- ^ S°, 54.4 J · K−1 · mol−1
- ^ Cp°, 45.02 J · K−1 · mol−1
- ^ ΔfH°, -8. kJ · mol−1