9Na4[Fe(CN)6] + 4MnO2 → 36NaCN + Fe4[Fe(CN)6]3 + 2Mn2O3 + 2FeO
Last updated:
The reaction of sodium hexacyanidoferrate(II) and manganese(IV) oxide yields sodium cyanide, iron(III) hexacyanidoferrate(II), manganese(III) oxide, and iron(II) oxide (Other reactions are here). This reaction is an oxidation-reduction reaction and is classified as follows:
Table of contents
Reaction data
Chemical equation
- Reaction of sodium hexacyanidoferrate(II) and manganese(IV) oxide
General equation
- Reaction of reducing species and reducible species
- Reducing speciesReducing agent + Reducible speciesOxidizing agent ⟶ ProductOxidation product + ProductReduction product
Oxidation state of each atom
- Reaction of sodium hexacyanidoferrate(II) and manganese(IV) oxide
Reactants
| Chemical formula | Name | Coefficient | Type | Type in general equation |
|---|---|---|---|---|
| Na4[Fe(CN)6] | Sodium hexacyanidoferrate(II) | 9 | Reducing | Reducing |
| MnO2 | Manganese(IV) oxide | 4 | Oxidizing | Reducible |
Products
| Chemical formula | Name | Coefficient | Type | Type in general equation |
|---|---|---|---|---|
| NaCN | Sodium cyanide | 36 | – | – |
| Fe4[Fe(CN)6]3 | Iron(III) hexacyanidoferrate(II) | 1 | Oxidized | – |
| Mn2O3 | Manganese(III) oxide | 2 | Reduced | – |
| FeO | Iron(II) oxide | 2 | – | – |
Thermodynamic changes
Thermodynamic data of reactants
| Chemical formula | Standard enthalpy of formation ΔfH° kJ · mol−1 | Standard Gibbs energy of formation ΔfG° kJ · mol−1 | Standard molar entropy S° J · K−1 · mol−1 | Standard molar heat capacity at constant pressure Cp° J · K−1 · mol−1 |
|---|---|---|---|---|
| Na4[Fe(CN)6] (ai) | -505.0[1] | -352.53[1] | 331.0[1] | – |
| MnO2 (cr) | -520.03[1] | -465.14[1] | 53.05[1] | 54.14[1] |
| MnO2 (am) precipitated | -502.5[1] | – | – | – |
* (ai):Ionized aqueous solution, (cr):Crystalline solid, (am):Amorphous solid
Thermodynamic data of products
| Chemical formula | Standard enthalpy of formation ΔfH° kJ · mol−1 | Standard Gibbs energy of formation ΔfG° kJ · mol−1 | Standard molar entropy S° J · K−1 · mol−1 | Standard molar heat capacity at constant pressure Cp° J · K−1 · mol−1 |
|---|---|---|---|---|
| NaCN (cr) cubic | -87.49[1] | -76.43[1] | 115.60[1] | 70.37[1] |
| NaCN (cr) orthorhombic | -90.75[1] | – | – | – |
| NaCN (g) | 109[1] | 79.94[1] | 249.43[1] | 51.17[1] |
| NaCN (ai) | -89.5[1] | -89.5[1] | 153.1[1] | – |
| NaCN (cr) 1/2 hydrate | -235.77[1] | – | – | – |
| NaCN (cr) 2 hydrate | -679.77[1] | – | – | – |
| Fe4[Fe(CN)6]3 | – | – | – | – |
| Mn2O3 (cr) | -959.0[1] | -881.1[1] | 110.5[1] | 107.65[1] |
| FeO (cr) | -272.0[1] | – | – | – |
* (cr):Crystalline solid, (g):Gas, (ai):Ionized aqueous solution
References
List of references
- 1Janiel J. Reed (1989)The NBS Tables of Chemical Thermodynamic Properties: Selected Values for Inorganic and C1 and C2 Organic Substances in SI UnitsNational Institute of Standards and Technology (NIST)
- ^ ΔfH°, -505.0 kJ · mol−1
- ^ ΔfG°, -352.53 kJ · mol−1
- ^ S°, 331.0 J · K−1 · mol−1
- ^ ΔfH°, -520.03 kJ · mol−1
- ^ ΔfG°, -465.14 kJ · mol−1
- ^ S°, 53.05 J · K−1 · mol−1
- ^ Cp°, 54.14 J · K−1 · mol−1
- ^ ΔfH°, -502.5 kJ · mol−1
- ^ ΔfH°, -87.49 kJ · mol−1
- ^ ΔfG°, -76.43 kJ · mol−1
- ^ S°, 115.60 J · K−1 · mol−1
- ^ Cp°, 70.37 J · K−1 · mol−1
- ^ ΔfH°, -90.75 kJ · mol−1
- ^ ΔfH°, 109. kJ · mol−1
- ^ ΔfG°, 79.94 kJ · mol−1
- ^ S°, 249.43 J · K−1 · mol−1
- ^ Cp°, 51.17 J · K−1 · mol−1
- ^ ΔfH°, -89.5 kJ · mol−1
- ^ ΔfG°, -89.5 kJ · mol−1
- ^ S°, 153.1 J · K−1 · mol−1
- ^ ΔfH°, -235.77 kJ · mol−1
- ^ ΔfH°, -679.77 kJ · mol−1
- ^ ΔfH°, -959.0 kJ · mol−1
- ^ ΔfG°, -881.1 kJ · mol−1
- ^ S°, 110.5 J · K−1 · mol−1
- ^ Cp°, 107.65 J · K−1 · mol−1
- ^ ΔfH°, -272.0 kJ · mol−1