4Na4[Fe(CN)6] + 2H2O 💧⚡→ 2Na3[Fe(CN)6] + 10NaCN + N2H4 + 2FeO + 2C
Last updated:
- Electrolysis of aqueous sodium hexacyanidoferrate(II) with water as non-redox agent
Electrolysis of aqueous sodium hexacyanidoferrate(II) yields sodium hexacyanidoferrate(III), sodium cyanide, hydrazine, iron(II) oxide, and (Other reactions are here). This reaction is an oxidation-reduction reaction and is classified as follows:
Table of contents
Reaction data
Chemical equation
- Electrolysis of aqueous sodium hexacyanidoferrate(II) with water as non-redox agent
General equation
- Electrolysis of aqueous solution with water as non redox agent
- Miscible with water/Very soluble in water/Soluble in waterSelf redox agent + H2ONon-redox agent💧⚡⟶ ProductOxidation product + ProductReduction product
Oxidation state of each atom
- Electrolysis of aqueous sodium hexacyanidoferrate(II) with water as non-redox agent
Reactants
| Chemical formula | Name | Coefficient | Type | Type in general equation |
|---|---|---|---|---|
| Na4[Fe(CN)6] | Sodium hexacyanidoferrate(II) | 4 | Self redox agent | Soluble in water |
| H2O | Water | 2 | – | Water |
Products
| Chemical formula | Name | Coefficient | Type | Type in general equation |
|---|---|---|---|---|
| Na3[Fe(CN)6] | Sodium hexacyanidoferrate(III) | 2 | Oxidized | – |
| NaCN | Sodium cyanide | 10 | – | – |
| N2H4 | Hydrazine | 1 | Oxidized | – |
| FeO | Iron(II) oxide | 2 | – | – |
| 2 | Reduced | – |
Thermodynamic changes
Changes in aqueous solution
- Electrolysis of aqueous sodium hexacyanidoferrate(II) with water as non-redox agent
- 4Na4[Fe(CN)6]Ionized aqueous solution + 2H2OLiquid2Na3[Fe(CN)6]Ionized aqueous solution + 10NaCNIonized aqueous solution + N2H4Un-ionized aqueous solution + 2FeOCrystalline solid + 2Crystalline solidgraphite💧⚡⟶
| Standard enthalpy of reaction ΔrH° kJ · mol−1 | Standard Gibbs energy of reaction ΔrG° kJ · mol−1 | Standard entropy of reaction ΔrS° J · K−1 · mol−1 | Standard heat capacity of reaction at constant pressure ΔrCp° J · K−1 · mol−1 | |
|---|---|---|---|---|
per 1 mol of Equation | 869.8 | – | – | – |
per 1 mol of | 217.4 | – | – | – |
per 1 mol of | 434.9 | – | – | – |
per 1 mol of | 434.9 | – | – | – |
per 1 mol of | 86.98 | – | – | – |
per 1 mol of | 869.8 | – | – | – |
per 1 mol of | 434.9 | – | – | – |
| 434.9 | – | – | – |
Thermodynamic data of reactants
| Chemical formula | Standard enthalpy of formation ΔfH° kJ · mol−1 | Standard Gibbs energy of formation ΔfG° kJ · mol−1 | Standard molar entropy S° J · K−1 · mol−1 | Standard molar heat capacity at constant pressure Cp° J · K−1 · mol−1 |
|---|---|---|---|---|
| Na4[Fe(CN)6] (ai) | -505.0[1] | -352.53[1] | 331.0[1] | – |
| H2O (cr) | – | – | – | – |
| H2O (l) | -285.830[1] | -237.129[1] | 69.91[1] | 75.291[1] |
| H2O (g) | -241.818[1] | -228.572[1] | 188.825[1] | 33.577[1] |
* (ai):Ionized aqueous solution, (cr):Crystalline solid, (l):Liquid, (g):Gas
Thermodynamic data of products
| Chemical formula | Standard enthalpy of formation ΔfH° kJ · mol−1 | Standard Gibbs energy of formation ΔfG° kJ · mol−1 | Standard molar entropy S° J · K−1 · mol−1 | Standard molar heat capacity at constant pressure Cp° J · K−1 · mol−1 |
|---|---|---|---|---|
| Na3[Fe(CN)6] (ai) | -158.6[1] | -56.4[1] | 447.3[1] | – |
| NaCN (cr) cubic | -87.49[1] | -76.43[1] | 115.60[1] | 70.37[1] |
| NaCN (cr) orthorhombic | -90.75[1] | – | – | – |
| NaCN (g) | 109[1] | 79.94[1] | 249.43[1] | 51.17[1] |
| NaCN (ai) | -89.5[1] | -89.5[1] | 153.1[1] | – |
| NaCN (cr) 1/2 hydrate | -235.77[1] | – | – | – |
| NaCN (cr) 2 hydrate | -679.77[1] | – | – | – |
| N2H4 (l) | 50.63[1] | 149.34[1] | 121.21[1] | 98.87[1] |
| N2H4 (g) | 95.40[1] | 159.35[1] | 238.47[1] | 49.58[1] |
| N2H4 (ao) | 34.31[1] | 128.1[1] | 138[1] | – |
| FeO (cr) | -272.0[1] | – | – | – |
| (cr) graphite | 0[1] | 0[1] | 5.740[1] | 8.527[1] |
| (cr) diamond | 1.895[1] | 2.900[1] | 2.377[1] | 6.113[1] |
| (g) | 716.682[1] | 671.257[1] | 158.096[1] | 20.838[1] |
* (ai):Ionized aqueous solution, (cr):Crystalline solid, (g):Gas, (l):Liquid, (ao):Un-ionized aqueous solution
References
List of references
- 1Janiel J. Reed (1989)The NBS Tables of Chemical Thermodynamic Properties: Selected Values for Inorganic and C1 and C2 Organic Substances in SI UnitsNational Institute of Standards and Technology (NIST)
- ^ ΔfH°, -505.0 kJ · mol−1
- ^ ΔfG°, -352.53 kJ · mol−1
- ^ S°, 331.0 J · K−1 · mol−1
- ^ ΔfH°, -285.830 kJ · mol−1
- ^ ΔfG°, -237.129 kJ · mol−1
- ^ S°, 69.91 J · K−1 · mol−1
- ^ Cp°, 75.291 J · K−1 · mol−1
- ^ ΔfH°, -241.818 kJ · mol−1
- ^ ΔfG°, -228.572 kJ · mol−1
- ^ S°, 188.825 J · K−1 · mol−1
- ^ Cp°, 33.577 J · K−1 · mol−1
- ^ ΔfH°, -158.6 kJ · mol−1
- ^ ΔfG°, -56.4 kJ · mol−1
- ^ S°, 447.3 J · K−1 · mol−1
- ^ ΔfH°, -87.49 kJ · mol−1
- ^ ΔfG°, -76.43 kJ · mol−1
- ^ S°, 115.60 J · K−1 · mol−1
- ^ Cp°, 70.37 J · K−1 · mol−1
- ^ ΔfH°, -90.75 kJ · mol−1
- ^ ΔfH°, 109. kJ · mol−1
- ^ ΔfG°, 79.94 kJ · mol−1
- ^ S°, 249.43 J · K−1 · mol−1
- ^ Cp°, 51.17 J · K−1 · mol−1
- ^ ΔfH°, -89.5 kJ · mol−1
- ^ ΔfG°, -89.5 kJ · mol−1
- ^ S°, 153.1 J · K−1 · mol−1
- ^ ΔfH°, -235.77 kJ · mol−1
- ^ ΔfH°, -679.77 kJ · mol−1
- ^ ΔfH°, 50.63 kJ · mol−1
- ^ ΔfG°, 149.34 kJ · mol−1
- ^ S°, 121.21 J · K−1 · mol−1
- ^ Cp°, 98.87 J · K−1 · mol−1
- ^ ΔfH°, 95.40 kJ · mol−1
- ^ ΔfG°, 159.35 kJ · mol−1
- ^ S°, 238.47 J · K−1 · mol−1
- ^ Cp°, 49.58 J · K−1 · mol−1
- ^ ΔfH°, 34.31 kJ · mol−1
- ^ ΔfG°, 128.1 kJ · mol−1
- ^ S°, 138. J · K−1 · mol−1
- ^ ΔfH°, -272.0 kJ · mol−1
- ^ ΔfH°, 0 kJ · mol−1
- ^ ΔfG°, 0 kJ · mol−1
- ^ S°, 5.740 J · K−1 · mol−1
- ^ Cp°, 8.527 J · K−1 · mol−1
- ^ ΔfH°, 1.895 kJ · mol−1
- ^ ΔfG°, 2.900 kJ · mol−1
- ^ S°, 2.377 J · K−1 · mol−1
- ^ Cp°, 6.113 J · K−1 · mol−1
- ^ ΔfH°, 716.682 kJ · mol−1
- ^ ΔfG°, 671.257 kJ · mol−1
- ^ S°, 158.096 J · K−1 · mol−1
- ^ Cp°, 20.838 J · K−1 · mol−1